MIG Wires

PWL MIG 2

PWL MIG 2 Classification : AWS 5.18, ER70S6 DIN 8559-SG2
Chemical Analysis of Wire (%)
C Mn Si S P Cu
0.06-0.15 1.40-1.85 0.80-1.15 0.02 max 0.02 max 0.30 max
Typical Mechanical Analysis of weld deposit
Tensile Strength (N/mm2) 570 min
Yield strength (N/mm2) 470
Elongation % A5d 26(>22%)
Impact properties (CVN) at -40 C 55 J (>47J)

Welding electrode wire, Cu coated with the addition of deoxidizing agents Mn and Si, designed for semi automatic welding under the protective atmosphere of CO2 (MAGC) or mixtures M21-80% Ar + 20% CO2 (MAGM). It is used for welding of unalloyed construction steels, boiler steels, shipbuilding steels, and low alloyed, general-purpose C-Mn steels of increased strength. Welding electrode wire can be in the range of 1.20 to 1.60mm for fabrication and 2.50 to 3.15mm for the Pipe manufacturers.