SAW Wires


PWL SAW 2 Classification : AWS 5.17, EM12K DIN 8557-S2
Chemical Analysis of Wire (%)
C Mn Si S P Cu
0.04-0.12 0.90-1.20 0.15 max 0.03 max 0.03 max 0.35 max
Typical Mechanical Analysis of weld deposit
Mechanical Properties + Typical values
Tensile Strength (Mpa) 500
Yield Strength (Mpa) 425
Elongation % 27
Impact at -20 C 47J

Welding wire electrode, Cu coated in combination with flux is suitable for welding low carbon steels, low alloyed steels and for medium and increased strength steels (construction, boiler and shipbuilding steels). It is used for making butt welds and fillet welds in general purpose steel constructions, pressure vessels. It is also used for pad welding on railways. Welding wire of diameters in the range from 2.0 to 5.0mm. Larges diameters are produced upon a beforehand made agreements.