SAW Wires
PWL SAW 4
| PWL SAW 4 |
Classification : AWS 5.17, EM12K DIN 8557-S3Si |
| Chemical Analysis of Wire (%) |
| C |
Mn |
Si |
S |
P |
Cu |
| 0.09-0.13 |
1.50-1.80 |
0.20-0.30 |
0.03 max |
0.03 max |
0.35 max |
| Typical Mechanical Analysis of weld deposit |
| Mechanical Properties + Typical values |
| Tensile Strength (Mpa) 500 |
| Yield Strength (Mpa) 440 |
| Elongation % 27 |
| Impact at -20 C 47J |
Welding wire electrode, Cu coated in combination with flux having increased Mn alloying component, is suitable for welding low-carbon steels, low-alloyed steels, for welding medium and increased strength steels (constructions, boilers and shipbuilding steels). Welding wire of diameters in the range from 2.0 to 5.0mm. Larges diameters are produced upon a beforehand made agreements.
